**Pneumatic Angle Grinder - Multi-Functional Power Tool for Metal, Wood, and Paint Removal - Ideal for Home Renovation, Wall Sanding & DIY Projects**

Feature:1. Pneumatic angle grinder, made of lightweight aluminum alloy material, strong and durable.2. Multi‑functional use, can be used for home decoration, paint and wall treatment, etc.3. The no‑load speed is about 11,000rpm, and the average air consumption is about 60L/min.4. Easy to operate, with locking switch, can prevent accidental start, safe and reliable.5. Equipped with high‑quality gear sets, low noise, strong power and high work efficiency.Specification:Item Type: Angle GrinderMaterial: Aluminum AlloyWeight: Approx. 1432g / 50.5ozSanding Wheel Diameter: 100mm / 4inHole Diameter: 16mm / 0.63inAir Intake: 1/4Intake Thread: G1/4No-Load Speed: 11000rpmAverage Air Consumption: 60L/MinScope of Application: Home decoration, paint and wall treatment, etc.How to Use:1. Perform a trial run for at least 30 seconds under no load, and use it after confirming that there is no abnormality2. The gas pipe must be placed at the back end during operation to prevent accidents3. Hold the machine firmly with both hands during work, and ensure stability4. If the gas stops suddenly during work, the switch must be set to the off state immediately5. During the grinding and polishing process, apply even force, and it is strictly forbidden to apply too much force or hit the object6. At the end of the work, turn off the switch first, and then put it down after the rotation is completely stopped, and the grinding disc is facing upwardsPackage List:1 x Angle Grinder1 x Handle1 x Air Port1 x Wrench1 x Grinding Disc1 x Manual1 x Detachable WrenchNote:1. Please allow 0‑1 inch error due to manual measurement. Thanks for your understanding.2. Monitors are not calibrated same, it